Anime BJD 1:10 Model "Nina" with movable eyes !
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Standard Digital File License
This is one of my original BJD models. Body proportions are anime, STL has all the parts in the best possible placement, I recommend to keep all the part oriented that way.
I made eye socket frame that can be printed and eyes are movable when inserted, no glue needed. For limbs and body connection, use the elastic string, if you tie it tense enough, doll can do one-leg stand and hold any pose. I recommend to end the string on a neck, there you make a double knot and put a head on, pull out the knot, put the socket cup on the string (cups have the C-shape and are placed on the backside of the board) and cup holds the knot in place, holding the head on the neck, whole body tense and require no glue again.
Back of the head has a release button to open the cap and access the eyes and knot area
8mm eyes fit the best, you can get them on aliexpress for 2$ a pair
Use high quality filament, I recommend to print hands separately and support them some more (They can be printed as small as 1:12 but many retractions mess them up so separate printing reduces that), for 1:10 , max nozzle is 0.2mm , if you scale it up to 1:5 you may go on with 0.4mm nozzle. Use tight support and low temp, refer to attached G-code settings, I spent a lot of printing on this one, when tuning it.