OMP M1 EVO Open Front Canopy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
OMP M1 EVO Open Front Canopy designed to insert the battery from the front.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 90
- Makes
- 1
- Views
- 337
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
This a tweaked version of my M2 Evo canopy that fits both the M1 Evo and the M1 plastic frame version.
I have included a canopy with no text on the side too.
A small 2s lipo extension is recommended to connect the battery, it can be then tucked inside the canopy out of sight.
Painting Tip. If you want to paint the canopy a fluorescent colour, then white filament must be used. Normally I would mask and spray the top half with my favourite colour. As the canopy is small and the top half is slightly raised with a lip, it was easier and quicker to paint it with a small brush. Any paint that goes over the line, just wait for the paint to dry, then scratch it off with a scalpel.
My canopies painted weigh 7.6g (one gramme more than the original) I printed them with PC fillament.
Happy flying