Mega LEGO Candy Cane & Peppermint Stick
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Christmas accessory for the 10:1 Mega Skeleton (and other 10:1 hands)
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 13
- Makes
- 0
- Views
- 95
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
There's options in the 3mf file to attempt to print whole, on its side, with supports. If your printer volume is large enough to print vertically, that significantly increases print time so I recommend printing horizontal. There's plates with the candy cane and peppermint already cut with connectors using .4 tolerance for some wiggle room.
If you drag in the stl files, pull both the red & white parts together as one to get the twist and then just paint in your slicer.
I got the best results printing at .16 layer height. I used 2 walls & 10% gyroid infill but you can adjust however you want. NO SUPPORTS are required when printing flat.
Assembly is pretty straightforward. The connectors aren't super tight but I didn't need glue to hold mine together.