VORON Fidget Toy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Satisfyingly clicky and smooth rolling fidget toy.
- Rating
- 4.81 / 5
- Likes
- 577
- Downloads
- 2,033
- Makes
- 25
- Views
- 13,957
- Reviews
- 21
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
VORON Fidget Toy
A fidget toy that has two printed clicky switches and a set of smooth rolling gears that uses VORON BOM hardware to assemble.
Credit for original spring mechanism idea goes to @kriswillcode
-----
BOM: 4 M3x12 SHCS
These are the recommended print settings:
Material: ABS or PLA
Layer height: 0.2mm
Extrusion width: 0.4mm
Infill percentage: 40%
Infill type: grid, gyroid, honeycomb, triangle, or cubic
Wall count: 4
Solid top/bottom layers: 5
Assembly: Refer to included manual, or:
1. Install click springs into slots on case bottom
2. Install rocker switch and click switch on posts on case bottom ends
3. Install gears on center posts of case bottom
4. Apply case top over bottom case/components
5. Secure with 4 M3x12 SHCS, threaded into plastic. Gently!