Cat wet treat stick feeding spoon
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
To feed small bites of wet treat rather than a whole tube at a time. Can seal the tube off and prevent drying.
- Rating
- 0 / 5
- Likes
- 50
- Downloads
- 124
- Makes
- 1
- Views
- 721
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Share Alike
🐾 Overview
My cat loves wet treats, and I wanted to use them for training. The problem is that squeezing the treat tube bit by bit is messy and awkward. To solve this, I designed this feeding spoon that makes dispensing, storing, and controlling treats much easier.
✨ Features
Allows treats to be dispensed gradually, perfect for training.
Provides a surface for squeezing food onto.
Makes it easier to fully empty the tube compared to using hands.
Includes a sealing cap to store an opened tube without drying out.
Can be flipped upside down to prevent licking during breaks, reducing distractions.
Prevents my dumb cat from biting holes into the tube.
Prior art:
I only found out after making this that there's already a commercial product that does this. Seems like those can't seal the tube. Regardless, it's a viable alternative.
🖨 Printing Instructions
Print the spoon body at a 45° angle, using the sealing cap as support.
Overhangs may look rough, but the angle preserves mechanically important parts.
Tested in PLA, though more flexible filaments may perform better.
Needs around 0.2 mm tolerance.
🐈 Using the Spoon
The hole in the push piece is for pulling it back once the tube is emptied.
You can bend the tail of the tube and hook it into the slots on the spoon to stop sliding—though this is usually optional.
The diamond-shaped hole on the spoon is designed for pushing the tube out after use.
Sealing & Unsealing:
Opened:

Sealed:

Note: A small amount of treat may remain in the tube even after fully pushing. If you really want, you'll need to remove the tube and scrape it out. Or let the cat figure it out.