PiSCSI (RaSCSI) Case with Pi Zero and OLED
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for PiSCSI (formerly RaSCSI) board with Raspberry Pi Zero mounted on bottom to allow use of OLED screen
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 79
- Makes
- 0
- Views
- 939
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
This is a case for the PiSCSI (formerly RaSCSI) board with a Raspberry Pi Zero mounted on the bottom. This allows the use of an optional OLED screen to display some additional information. There are three configurations available:
A standard setup with no OLED
One with a window on top for a small 128x32 OLED display
One with a window on the front for a larger 128x64 OLED display
I hold the larger display in place with a dab of hot glue on the bottom case. Note that the photo shows an earlier version of the no-OLED top with fewer vent holes. The RaSCSI/Pi Zero combo is held in place using 2 M2.5x8 screws.