1 / 5
Bora Centipede Nut Socket Tool
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Double Sided Socket for Both Bora Centipede Nut Types
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 46
- Makes
- 0
- Views
- 175
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Purpose
This little reversible tool is for both types of nuts (hex nut and the 15-sided one on the risers).
It features a small ejection plunger for nuts that get stuck in the tool.
Print Settings
I used the default 0.25mm Speed profile with 15% Gyroid infill.
"Support on build plate" is needed for the bottom socket.
PLA works fine.
After printing, press hard on the plunger from below to break it lose. Then remove the supports.