1 / 2
Complete AEG housing - Airsoft M4 (AR15 style) - Skeletonized - Fully Printable — image 1
1 / 2

Complete AEG housing - Airsoft M4 (AR15 style) - Skeletonized - Fully Printable

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

These are just remixes of Igniz's models. I made them because I had a specific project I was working on and wanted to "skeletonize" some of them. The "project" was a set of rifles, each with slight variations, such as different length barrels, or handguards, or alternate Buttpads or stock engravings. Because of this, there are various length handguards and barrels. It is up to you to determine which handguard and barrel combo you want to print for your build and the look you are going for. I've had a few requests for the files I used in my YouTube videos, so here they are! :)

Please let me know if you have any questions.

Here are all the parts I ordered to complete the gun:

CYMA Gearbox: Note, this is a VERY tight fit, make sure your printer is tuned well

G&P 6.05mm OEM Brass Inner Barrel for Airsoft AEGs (Length: 363mm): my barrel is too long, but it works well enough for me. I'm using the default barrel length files included. Not exactly sure what length to buy, but I'd estimate 300mm sounds about right

Echo1 M4 Metal 1pc Hop Up Chamber with Bucking: DO NOT ORDER THIS HOP-UP. It does not fit in the upper receiver. The top external gear section of the hop-up bumps into the top section of the upper receiver and it WILL NOT fit in place without cutting or modifying the files. This is particularly bad because the section that needs to be changed is recessed deep into the receiver so you cannot easily cut away the excess plastic with a knife.

I would recommend trying one of these hop-ups, I do not know if it will work with this model or not:

Tags