Spool Adapter for MakerBot Replicator+ - No Supports!
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€5.17 – €6.32 net (excluding VAT)
For file: ReplicatorPlusSpoolAdapter_0.4n_0.2mm_PLA_MK4SMMU3_4h16m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.75 excluding VAT (range midpoint).
- Weight reported by the author
- 103 g
- Print time reported by the author
- 4.26 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Spool adapter for Replicator+ drawer, to hold standard filament spools. No supports required.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 25
- Makes
- 1
- Views
- 62
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Inspired by this design from Instructables - it failed when I printed it, so I decided to design my own from scratch.
Recommended print settings:
Material: PLA or PETG
Layer Height: 0.2 mm or less
Infill % : 30+
Supports: No
Print Orientation: Default as modeled
Brim: No
No supports. The openings are for the MakerBot spool holder to clip onto, then a normal spool will hang on the post. This does require that the "drawer" be left open on the Replicator+.
Test print for retention:
