CheeseMix Plate (Corner Hole) 2x2 to 14x14
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Grid plate for cameras rigging and accessories.
- Rating
- 0 / 5
- Likes
- 1
- Makes
- 0
- Views
- 138
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Standard Digital File License
This plate pack contains "Corner Hole" plates, sizes 2x2 to 14x14.
The double-sided hole pattern is based on a 9mm grid. Holes are 18mm apart with a second grid of upside-down holes located in the centers of each grid section. Plates can be bolted together, to cages etc. using 1/4-20 hardware. Hex nuts can be inserted into the top or bottom of the grid for a secure mounting point. Around each mounting point are holes compatible with 3mm anti twist pins. Plates are 9mm thick.
This is the "Corner Hole" plate set, the difference from the "Blank Corner" set is depicted bellow.
There are some duplicates between sets. Its a bit of a brain twister to convert equivalent plates between sets so I have posted each full set for convenience.
Printing | |
|---|---|
Layer Height | 0.2mm |
Walls | 3 or more |
Top/Bottom | 3 or more |
Infill | 25% or more |
Support | No |
CheeseMix is designed for 1/4-20 hardware. The main fastener is a 0.5" (1/2) long cap screw with a head Diameter of 0.375 (3/8) and a head thickness of 0.125" (1/8). The bolt head sits bellow the surface of the plate, recessed in the hex pockets. Nuts should be 7/16 flat to flat and 0.1875" (3/16) thick, or less, to sit bellow the surface of the plate.