Christmas Ball - LED Candle
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.42 – €0.51 net (excluding VAT)
For file: Christmas-Ball-Lid_MINIIS_30m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.46 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 30 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Christmas Ball with an option to add LED tea light candle inside to make it glow!
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 55
- Makes
- 0
- Views
- 267
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Relatively easy to print 78 mm diameter Christmas Ball for your cristmas decorating needs!
Choose from smooth finish or one with decorative shapes on the surface!
Twist-lock lid
It features a twist-lock lid so you can add LED tea light candle inside to make it glow!
Maximum diameter for the LED tea light is 40 mm.
Built-in supports
The models have a built-in supports that also act as a brim to keep the print attached to the print surface.
Built-in supports are easy to remove by grabbing with pliers ans twisting. Lids outer supports can be removed by just pressing them loose from the side. Locking tab supports may require little bit more force to press loose. Non-supported versions also included!
Tips
Transparent/opaque filaments work best with LED candles.
Fuzzy skin gives transparent filament that nice frosted effect. (Or a lemon effect for yellow filament :D)
3mf slicer files have fuzzy skin blocking cylinders on the supports/inner parts and color change for lid top also applied.
It's not wise to use real candles...
Please share your makes especially if you print these with exotic colours or silk filaments!