Dremel Spanner Wrench clip / holder attached to dremel. This is a MUST
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Forget about losing the spanner every time you put it down. just slip it onto the dremel holder. saved me so much agro
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
So basically i found this should be the number 1 dremel attachment. i know its the internet so you might feel its number 29 ☺
I used to put my spanner down after tightening and untightening and lose it.
so i printed a little holder that fits the contour of my dremel. i thing should be similar for all dremels.
guide
print the peices. i did it in petg as petg is much better than pla for usuable parts.
first with the dremel abrasive wheel clean up and polish up the spanner wrench. so its dead smooth
then you can put a bit of oil on it.
then heat it up over fire or something until its hot. (not red hot but hot enough to slightly melt the petg)
then rub it in the clip a few times until it cools down. what you will be left with is a very beutiful snug fit that it can easily be removed but at the same time will not fall out with vibrations. you might need to repeat this process a few times. i would print two or three just for backups.
i'm telling you afterwards it works amazing.
optional peel off the plastic sign on the dremel where you want to attach it to. sand that area of the dremel and of the base of the clip. super glue it on.
then slip on the little piece that goes on the spanner and attach a bit of super glue. this little piece helps the fingers when the nut is hard to turn so your fingers have something to grip. mark the thicker side or colour it so you know which way to insert.
and thats it never lose your spanner wrench again.
p.s. always get used to putting the spanner back in since you don't want debris getting inside
if you like it please leave a good comment