1 / 5
250601 Trailer connector cap (ISO 11446)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
On my trailer there is a nice connector holder for the 13-pin plug (standard ISO 11446).By mounting it as suggested,…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 186
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
On my trailer there is a nice connector holder for the 13-pin plug (standard ISO 11446). By mounting it as suggested, the plug fills up with water from the bottom. So I designed and printed a simple cap. When mounting, the plug is closed and the slanted cap lets the water run off.
Print settings 0,2 mm layer, infill 15%, material PLA.
Please like, follow and return your comments.
Category: Automotive