Blum Compact BLUMOTION 86 Degree Restriction Clip Blum 38C315B3 Reproduction
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This clip is used to limit the motion of the Blum Compact Hinges (several kinds).
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 65
- Makes
- 0
- Views
- 264
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The photo shows the original clip on the left, the reproduction, and an installed reproduction clip.
Note that you should print this with a 0.25mm nozzle using high quality settings on your slicer.
The model was made using SAE measurements, so it may need to be converted to metric for your slicer (2540%). Orca senses this and changes the measurements with a click on a dialog box.
Ensure the clip is locked in place by pressing firmly on each side of the base with a small screw driver.
A 0.25 nozzle recommended. The factory part has recesses that do not seem functional so I did not add them to the model. Perhaps they were added to reduce production costs.
I used three approaches to design this part. The first was to take zoomed photos from the top and sides. I used precision calipers to make measurements. It took about 20 iterations to get the fit working in the 100 micron, 0.1mm, 1/256 in. zone. It is my first attempt at a small part.