RC Excavator – Fully Assembled Fusion 360 Model and CAT logos
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fully assembled RC excavator in Fusion 360 with functional joints for motion study, plus cosmetic CAT-style logos.
- Rating
- 5 / 5
- Likes
- 205
- Downloads
- 616
- Makes
- 0
- Views
- 5,672
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a fully assembled RC excavator in Fusion 360 using the original STEP files from Professor Boots. All components are constrained with functional joints (revolute and slider), allowing motion studies and kinematic analysis. The rear cover includes cosmetic CAT-style logos for a realistic look. A redesigned track system is included for proper assembly.
You can also download the .f3d file to explore and test how all parts of the excavator move.
Build instructions:
Print all parts following the original files from Professor Boots, except for the rear cover – use the modified STL files provided.
Attach the CAT-style logos to the sides of the rear cover using a small amount of super glue.
Assemble all parts following the sequence in Professor Boots workshop.
Print tips:
Requieres AMS system or similar to print this modification in 4 different colors (gold, black, white, red commended).
Supports are not needed for real cover and CAT-style logos.
Layer height 0.2 mm, 15% infill.