1 / 2
Y splitter ball valve Lockable Body
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made body lockable and added a hanger
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 8
- Makes
- 0
- Views
- 151
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
Use a ~m5 nut on inside of the body, and an m5 bolt in the knob.
The hole the bolt locks into needs drilling. At each lock position, hold it tight, and drill a 5-6mm hole just through the top layer. The bolt will screw into this and hold it in this position.
I've used the original model for a 2kw diesel heater with a 60mm ourside diameter duct. So model is printed at scale 1.073 to give an OD of 60mm. You may need to use smaller bolts if using the original model sizes.