Star Wars Fireball
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.60 – €0.73 net (excluding VAT)
For file: fireball-print_0.1mm_PLA_MK3S_58m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.67 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 58.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Model of the Fireball from Star Wars: Resistance
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 50
- Makes
- 0
- Views
- 128
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles & Machines
- License
- Creative Commons — Attribution
The Fireball is the racer flown by Kazuda Xiono in Star Wars: Resistance. Although it is introduced as a mostly wrecked ship with a tendency to blow up, it proves itself to be quite capable and mostly reliable over the course of the show.
Dimensions
Length | Width | Height |
|---|---|---|
43mm | 44.6mm | 7.9mm |
The version with pin is compatible with a small pin and base (link).
Print Instructions
Print either fireball-print.stl (no pin) or fireball-pin.stl (with pin, shown in photos).
Always add fireball-support blocker.stl as a support-blocker. (In your slicer, right-click on the fireball, Add Support Blocker -> Load... -> Select fireball-support blocker.stl. Might be different for other slicers.)
Printed at 0.1mm layer height. Requires supports on buildplate.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#