Parts to assist in building a 10m "Wonderbar" antenna - a compact dipole with a turning radius of 4 ft!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Included are a coil form, a box for the feedpoint with a hole for a panel-mount BNC connector, and washers for u-bolts.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 13
- Makes
- 0
- Views
- 153
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Public Domain
Plans for the antenna can be found here: https://www.hamuniverse.com/wonderbar.html
I used #14 insulated common household wiring for the coil and #16 hook-up wire for the "bowtie" part and the 2-turn coupling loop. The bowtie shape I made using four 4ft. fibreglass driveway markers from a nearby agricultural supply store attached with u-bolts to a plywood base.
I found that I needed the entire length of the centre loading coil (no need for a tap) and I found that horizontal part of the bowtie needed to be 51" long, not 48" as shown on the web page above.