1.75mm Filament dust filter [2.87g - PLA]
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Functional filament dust filter. Print-in-place hinges and a reusable snap-fit lock. 1.2mm thick walls.
- Rating
- 4 / 5
- Likes
- 28
- Downloads
- 195
- Makes
- 1
- Views
- 613
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
Filament dust filter
Print-in-place hinges and a reusable snap-fit lock.
1.2mm walls.
Weight [Sunlu Matte Gray PLA]
Instructions:
Fill each of the container's halves with tightly packed filtering media; cotton, a sponge, fabric, or any material which may dry-wipe the surface of the filament as it is driven through the box.
Wrap it around the filament right where the spool starts. It'll eventually jam where it belongs.
Replace or clean the filler after each print for optimal performance.
Sponge media often lasts a bit longer before saturating,
Cotton allows to observe/trace the amount of dust buildup thanks to the contrast.
Printing notes:
Printed and tested on PLA @ 0.2mm and 0.12mm layer heights. Both work.
Default hinge clearance is set at 0.15mm, provided it simply works for my printer (Elegoo CC).
Added a 0.2 and 0.3mm clearance versions. Just because.
(As a former Ender 2 V3 user, its what I would've wished for).
The model should be equally compatible with PETG, ABS, ASA and related common printing materials, although tolerances might vary. Tailor to individual printer needs.
Printer parameters included in 3mf file. Compatible with Bamboo X1 Series, from personal experience.