1 / 18
Print in Place Articulated Santa Miniature — image 1
1 / 18

Print in Place Articulated Santa Miniature

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Getting into the holiday spirit with this one - an articulated Santa flexi figurine!

Rating
0 / 5
Likes
35
Downloads
139
Makes
0
Views
360
Reviews
0

Updated at source:

Model information

License
Standard Digital File License

Join here to get access: https://www.patreon.com/kogi3d

Print in Place Articulated Santa Model
 

Hey everyone! 🎅✨
Getting into the holiday spirit with this one - an articulated Santa flexy figurine! 🎄
It’s the perfect time to start preparing for the festive season, and this jolly little guy is ready to spread some cheer. Whether you’re printing for fun or offering holiday-themed prints, this Santa is sure to bring a smile. 🎁

⚠ Note:
Before printing, make sure your printer bed is clean and properly leveled for the best adhesion. Also, double-check all temperature and speed settings based on the filament type you’re using to ensure optimal results.

The model is designed to be printed at the provided size 69.3 × 80 × 22.96 mm (≈ 2.73 × 3.15 × 0.90 in) - scaling it down may affect the articulation and joint clearance, so adjust carefully if you choose to resize.

🖨 Recommended Print Settings:

  • Layer Height: 0.15–0.2 mm

  • Infill: 10–15%

  • Perimeters/Walls: 2

  • Model in Preview Size: 69.3 × 80 × 22.96 mm (≈ 2.73 × 3.15 × 0.90 in)

  • Supports: Not required (model is support-free)

  • Material: PLA recommended

  • Orientation: Print flat on the build plate

💡 For the best articulation, check that joints move freely after cooling - gently flex each part to loosen up the hinges.

More models and commercial license are available for my Patreon supporters ✨
Join here to get access: https://www.patreon.com/kogi3d

Tags