Emergency Haribo Gummy Bear Cage / Klec na Haribo Medvídky
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A lightweight printable cage designed to hold a small bag of Haribo gummy bears. / Lehká klec na gumové medvídky Haribo.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 24
- Makes
- 0
- Views
- 134
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
🇨🇿 Český popis je uveden níže / Czech description below
🇬🇧 Model description
This model was originally designed as a New Year’s greeting gift (PF) to amuse my friend – bear keeper and later many others 🙂
The cage is designed to be lightweight, material-efficient and fully printable without supports.
A small bag of Haribo gummy bears fits perfectly inside, but the model can also be used as a fun gift container, message holder or novelty decoration.
I like to call it KPZ – Emergency Rescue Cage.
In a critical situation, simply break the bars and release the bears 🐻🐻🐻
Design notes
Print-in-place design, no supports required
Thin bars are intentionally easy to break
Reinforced top eyelet using a perimeter modifier
Designed to be printed in one single piece
Printing pauses
The model uses two user-defined pauses (G-code) during printing:
Before bridging the top grid – allows inserting gummy bears
Before closing the top eyelet – allows inserting a 15 mm key ring (e.g. with a greeting card)
🇨🇿 Popis modelu
Model vznikl původně jako novoroční přání (PF) s cílem pobavit kamaráda–medvědáře… a postupně i další nadšence 🙂
Klec je navržena jako lehká, úsporná na materiál a plně tisknutelná bez podpor.
Dovnitř perfektně pasuje malý pytlík gumových medvídků Haribo, ale fantazii se meze nekladou – může sloužit i jako originální obal na drobný dárek, vzkaz nebo pozornost.
Model s nadsázkou nazývám KPZ – Klec Poslední Záchrany.
V krizové situaci stačí vylomit mříž a vypustit medvědy 🐻🐻🐻
Konstrukce a poznámky
Tisk bez podpor
Mříž je záměrně tenká a snadno vylomitelná
Horní očko je vyztuženo pomocí modifikátoru perimetrů
Model je navržen pro tisk v jednom kuse
Pauzy během tisku
Při tisku jsou použity dvě uživatelské pauzy (G-code):
Před přemostěním víčka mříže – umožňuje vložit gumové medvídky
Před uzavřením horního očka – umožňuje vložit 15mm kroužek na klíče (např. s přáníčkem)
🖨 Print settings / Tiskové parametry
Material / Materiál: PLA (tested also with PLA Silk)
Nozzle / Tryska: 0.4 mm
Printer / Tiskárna: Prusa CORE One
Profile / Profil: 0.20mm SPEED (modified / upravený)
Perimeters (cage): 2
Perimeters (eyelet): 5 (via modifier)
Infill / Výplň: 10 %
User-defined pauses (G-code) / Dvě uživatelské pauzy (G-code)
;--- USER G-CODE FOR OBJECT INSERTION ---
M300 S1000 P150 ; Beep
M300 S1500 P150 ; Beep
M300 S1000 P150 ; Beep
M300 S1500 P150 ; BeepM117 Insert gummy bears / key ring
; --- PAUSE FOR OBJECT INSERTION ---
M83 ; extruder relative
G91 ; relative positioning
G1 Z5 F3000 ; lift nozzle by 5 mm
G90 ; back to absolute positioning
G1 X20 Y20 F9000 ; park position
G1 E-6 F1200 ; retract
M601 ; pause
; --- AFTER RESUMING PRINT ---
M83
G1 E7 F800 ; prime + compensate oozing
G4 P300 ; short pause
M117 Resuming print
; M82 if using absolute extruder mode