1 / 9
Up Plus 2 E3D V6 mount — image 1
1 / 9

Up Plus 2 E3D V6 mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

E3D V6 mount for an Up Plus 2 Print settings I used: -0,1 mm layerheight (I think slightly higher won't be a problem)…

Rating
0 / 5
Likes
3
Downloads
36
Makes
0
Views
426
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

E3D V6 mount for an Up Plus 2

Print settings I used:

-0,1 mm layerheight (I think slightly higher won't be a problem)

-60% infill

-Printed in PETG but ABS, ASA or another material that is ok with high temps should be fine.

Parts needed:

-E3D V6

-30 x 30 fan

-40 x 40 radial fan

-M4 nut (mount to Up Carriage)

-2 x M3 nut (V6 clamp)

-4 x M2 x 5 bolt (40 x 40 fan)

-4 x M3 x 12 - 15mm (30 x 30 fan)

-4 x M3 x 8 (closing plate)

-Bowden extruder

-Bowden tube

Coming update:

Strain relief for the power cables and bowden tube, it is already prepared for this with holes so it shouldn't need reprinting when I add this.

I'm running this on a completely modified up plus 2 with a SKR board with marlin, I don't think it's possible to get running good with the original board + firmware. If people are interested I can write a short manual on how I did this conversion with the included firmware. Also designed and lasercut an enclosure that I can share but it will take a bit of work and I feel like I'm the only person left that still uses an Up Plus so I don't want to waste my time on that.

21-10-2020: Added extruder mount

Category: 3D Printer Parts

Tags