1 / 6
Added parts for Trencity and BRIO train sets. Turntable, lift, switch, F to F piece and M to M piece. — image 1
1 / 6

Added parts for Trencity and BRIO train sets. Turntable, lift, switch, F to F piece and M to M piece.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

3 new parts compatible with both trencity and brio train sets. Replacement M to M and F to F connectors.

Rating
0 / 5
Likes
9
Downloads
79
Makes
0
Views
374
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

These are some pieces that should be compatible with both TRENCITY (Argentinian counterpart) and BRIO train sets. I've always wanted more parts so i could let my creativity run wild. I used trencity measurements but the parts should be BRIO compatible (according to google). The pieces are: A turntable. A mechanical track switch. A screw track elevator. An F to F and M to M connector (because you always run out of those). The file has one of each so you can print only what you want or the whole bundle.

Printing.3mf and .step is ONE FILE TO PRINT EVERY PART NEEDED AT ONCE. if you have a huge build volume (or you can just split it).

IMPORTANT: There are 2 threaded rods, THEY ARE DIFERENT, one is threaded clockwise and the other anticlockwise. PRINT 2 OF EACH, SAME GOES FOR THE 16 TOOTH GEARS.

Instructions: (Only the turntable requires instructions)

  1. Place the gears in such manner that the slots are all aligned in the same direction.

  2. Place the threaded rods in the holes in the 16 tooth gears (smooth side down). It is important that the correct rods are in each hole, you can check by screwing them in the platform that says "LIFT" but take them out before placing them in the hole.

  3. Place the platform on top of the rods.

  4. Turn the 32 tooth gear so that the platform lowers into place, you can help it by applying a bit of pressure at the top. 

Tags