M3 Remixed Pastamatic Guiding-Cube Upgrade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cube to more securely hold the guidestone in place for your Pastamatic, using an M3x16 screw
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 103
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I remixed Druckwerkstatt 3D's cube upgrade that holds the Pastamatic's guidingstone in Place. The original from the great Pastamatic never stayed in place. I stuck some tape on it when I first made it and I left it that way for over a year. Finally decided it was time for a few upgrades. Bolts and nuts to replace the pins in most locations, and this cube will no longer have tape holding it in.
What I did was take Druckwerkstatt 3D's STL files, drop them in Blender, and scaled the holes only on the X and Y axes to 75%, which is just about right for M3 screws. I didn't have any M4 screws appropriate for his model but I definitely have M3 left over from other projects. M3x12 was not long enough, M3x16 worked. M3x20 may or may not stick out, I did not try it. It would hold, but I hate bare screw ends sticking out.
Good luck and happy printing!