1 / 3
Samsung Washer/Dryer Knob Mount DC64-03186A — image 1
1 / 3

Samsung Washer/Dryer Knob Mount DC64-03186A

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€2.62 – €3.20 net (excluding VAT)

For file: samsung_knob_mount_0.6n_0.3mm_PLA_MINI_2h22m.bgcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €2.91 excluding VAT (range midpoint).

Weight reported by the author
48 g
Print time reported by the author
2.36 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Replacement mounting bracket for attaching the decorative portion of the knob to the appliance.

Rating
0 / 5
Likes
6
Downloads
50
Makes
0
Views
172
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

NOTE: Print tilted at 45 degrees angled up off the build plate to provide enough structural support for both the clips and center post.

This piece is held into the decorative knob shell with 4 Phillips screws. Simply unscrew the old broken piece, and replace it with the printed part using the same screws.

Tags