Buckle for Vertical 25mm Straps
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.09 – €1.34 net (excluding VAT)
For file: StrapClipSet_0.4n_0.2mm_PLA_MINI_1h19m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.21 excluding VAT (range midpoint).
- Weight reported by the author
- 13 g
- Print time reported by the author
- 1.32 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A compact buckle for attaching equipment. Fits straps with 25mm width.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 0
- Views
- 99
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Made this remix so I could attach a admin pouch to my harness. The mechanism of the clip is untouched from the original. I used the clip for 17mm straps.
Fits straps that are 25mm in width. In my case (shown in the images) I attach a "Snigel" Admin Pouch to my harness.
With some filaments the mechanics can be a little tight so use some kind of lubricant initially to make it slide more easily. I used some vaselin.
Follow the original model for print instructions. There are some supports needed that the original model explains on how to add and to make all the moving parts work.
I include a 3mf file with the orientations and support added for reference.