Gingerbread Tapehead
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
......▶
⏪⏺⏩ 🍪
......⏺
..⏬⏬
Flexible arms and legs. Rewind in different directions.
The body is printed together with the top colored elements, nozzle purging in this case is minimal.
Secure the stub into the reel using glue. Insert the reel body, this step will require effort 💪.
To make vertical walls have a ripple effect, I used Special Mode - Fuzzy Skin
Contour(so the hole remains unchanged)
point distance 0.3mm
skin thickness 0.2mm
Print the stub and the reel without this mode.
Secure the stub into the reel using glue. Insert the reel body.
For better sliding, use silicone lubricant for plastic (only non-thick).
On the right leg there is a hole to use as a keychain 🔑
🎄🎄🍪🎄
©Personal use only 💀
👉 Check My Patreon and Boosty 👈
Join my Telegram! ⭐💬
Here 👇 you can support me.
