Ace Of Spades - Lemmy - Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ian Fraser "Lemmy" Kilmister - Hueforge
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 52
- Makes
- 0
- Views
- 203
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Based on an idea found on Pinterest
This Hueforge requires two conditions to be perfectly executed:
With a layer height of 0.04 mm, the levelling must be perfectly adjusted. I don't know if all current printers are capable of printing at this height, but I had no problems with my A1 Mini
The result you see is only possible with a filament that has a transmission value of around 7 for the white
how to:
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 134.57x150mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 1.64mm and the Actual Thickness is 1.6mm
Filaments Used:
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#ffffff PLA BambuLab Tough+ White Transmission Distance: 7
This print uses 2 unique filaments
Swap Instructions:
Start with Black
At layer #14 (0.68mm) swap to White for the rest
That's all