Prusa Buddy Cam Base +2cm
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.71 – €3.31 net (excluding VAT)
For file: 20251221_Boddy-Base-Ohne-Laschen_0.4n_0.2mm_PETG-CF_MK4S_2h13m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.01 excluding VAT (range midpoint).
- Weight reported by the author
- 58 g
- Print time reported by the author
- 2.22 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Adapter für originalen Prusa Buddy Cam Halter +2cm
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 101
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Mir ist der originale Stand von Prusa etwas zu tief. Hier findet Ihr eine Erhöhung um 2cm in zwei Ausführungen. Eine Ausführung mit Laschen zum Anschrauben des Halters und eine Ausführung ohne diese Laschen. Beide haben einen Pin im Inneren der das Verdrehen des originalen Standes verhindert, so kann immer die selbe Kamera-Position wiedergefunden werden.
Ich habe das ganze in PETG-CF auf einem Prusa MK4S gedruckt.
Viel Spaß beim Drucken. Wenn Euch das Modell gefällt würde ich mich über ein like freuen.
The original Prusa stand is a bit too low for my liking. Here you'll find a 2cm riser in two versions: one with tabs for screwing on the mount and one without. Both have an internal pin that prevents the original stand from twisting, ensuring you can always find the same camera position.
I printed this in PETG-CF on a Prusa MK4S.
Have fun printing! If you like the model, I would be happy if you leave me a like