"Ludo"-like Mini Game / "Mensch ärgere dich nicht"-ähnliches Mini-Spiel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mini "Ludo"-like game in an 80x70x30 mm box Ein Mini "Mensch ärgere dich nicht"-ähnliches Spiel in einer 80x70x30 Box
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 93
- Makes
- 1
- Views
- 392
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution
A small gift for travelers: A mini "Ludo"-like game in an 80x70x30 mm box for printing on single-color printers. The game board is about 13 x 13 cm.
The game board is divided into four sections held together by dovetail joints. A small connector is included for the center, but it's optional.
The colored spaces on the sections are slightly recessed, and colored discs, only 0.4 mm (two layers) thick, are glued into them. The discs for the four spaces in the target area are slightly smaller than those in the start area. To make the spaces stand out from the game board color, a color change is provided at layer 9 (with a 0.2 mm layer height). In the example shown, the starting color is white, and then it changes to light blue at layer 9.
The dice can be printed in a single color or four, each in the game board color, as shown in the example. It should be printed with 100% infill, to make it a bit heavier.
Printing times (Neptune 4 Pro):
Plate 1 with the playing field tiles including color change: approx. 1 hour
Plate 2 with the colored elements: approx. 15 minutes per color
Plate 3 with box and lid: approx. 1 hour
EDIT 2026-01-10: To improve the order in the box (# game inserts), I divided the box a bit. To take the whole thing to the extreme, I constructed four small boxes for the cones and cubes of the individual colors, but printing is optional. The insert boxes are higher than the main box dividers so that they are easy to grab, the playing field tiles then go on top.'
The Lid and the external dimensions of the box remain unchanged.
________________________________________________________________________________________________
Ein kleines Geschenk für Reisende: Ein Mini "Mensch ärgere dich nicht"-ähnliches Spiel in einer 80x70x30 Box für den Druck auf Einfarb-Druckern. Das Spielfeld ist ca. 13 x 13 cm groß.
Das Spielfeld ist in 4 Platten unterteilt, die über Schwalbenschwanz-Verbindungen zusammengehalten werden. Für die Mitte ist noch ein kleiner Verbinder dabei, den man aber nicht verwenden muss.
Die farbigen Felder auf den Platten sind etwas tiefer und dort werden farbige Scheiben eingeklebt, die nur 0,4mm (2 Layer) dick sind. Die Scheiben für die vier Felder im Zielbereich sind etwas kleiner als die im Startbereich. Damit sich die Felder von der Spielfeldfarbe abheben ist ein Farbwechsel bei Layer 9 vorgesehen (bei 0,2mm Layerhöhe). Im gezeigten Beispiel ist die Startfarbe weiß und dann wird bei Layer 9 auf hellblau gewechselt.
Den Würfel kann man entweder nur in einer Farbe drucken oder vier Stück, jeweils in der Spielfarbe, wie im Beispiel gezeigt. Er sollte mit 100% Infill gedruckt werden, damit er etwas schwerer wird.
Druckzeiten (Neptune 4 Pro):
Platte 1 mit den Spielfeld-Platten incl. Farbwechsel: ca. 1 Std.
Platte 2 mit den farbigen Elementen: ca. 15 Minuten pro Farbe
Platte 3 mit Box und Deckel: ca. 1 Std.
EDIT 10.01.26: Um die Ordnung in der Box zu verbessern (# game inserts), habe ich die Box noch etwas unterteilt. Um das Ganze auf die Spitze zu treiben, habe ich noch vier kleine Boxen für die Kegel und Würfel der einzelnen Farben konstruiert, das Drucken ist aber optional. Die Einsatz-Boxen sind höher als die Hauptbox-Teiler, so dass man sie leicht greifen kann, die Spielfeld-Platten kommen dann oben drauf.
Der Deckel und die Außenmaße der Box bleiben unverändert.