Magic trick a metal sphere through a knife
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Metal sphere (from a bearing) penetrates a knife.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 46
- Makes
- 0
- Views
- 436
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial
The metal sphere through a knife
Material:
I used PETG but PLA wil be fine as well.
Infill 20%
No support, no birm
Print the knife NO support (ignore the warning) (the printer will manage the span/bridge as it is not wide)
The texture over the abridged area differs a bit, and therefore it is visible on the top of the knife, sand it away removing the evidence of the magnet below
Additionally you will need:
1) Magnet D=8mm, H=1.5mm
2) Some glue for the magnet and the handle
3) Fine sandpaper
4) Two metal balls as used in bearings (two nuts will work for testing)
The magic presentation:
Enjoy!
s10k