1 / 9
pc support
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
this support promotes ventilation during long uses
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 88
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This support promotes ventilation during extended use and was designed to obstruct the fans as little as possible. Its dovetail joints give it structural strength even with a 5% print infill. The support holds a maximum weight of 3kg with a 20% infill. I recommend printing it in PETG as it is more robust than PLA. If you don't have PETG available, you can also print it in PLA as I did, but the structural strength will be reduced.