Curtain rings/hooks
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.99 – €1.21 net (excluding VAT)
For file: CurtainHangers-o20mm_0.4n_0.2mm_PETG_COREONE_41m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.10 excluding VAT (range midpoint).
- Weight reported by the author
- 24 g
- Print time reported by the author
- 41.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Curtain rings/hooks for curtain rods with a diameter of 20mm, 26mm (about 1") or 30mm
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 81
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Curtain rings/holders for typical IKEA curtain rods with diameter of 20mm, 26mm or 30mm.
Recommended print settings:
Filament: PETG
0.4mm Nozzle
Walls/Perimeters 12
NOTE:
Do not print with PLA as PLA will creep/deform if put under sustained load.