GameCube "Triforce" Simplified Corner Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simplified version of the "Logo Dunk" corner stand:https://www.thingiverse.com/thing:4735302 Functionality-wise it's…
- Rating
- 4 / 5
- Likes
- 25
- Downloads
- 135
- Makes
- 1
- Views
- 1,227
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
Simplified version of the "Logo Dunk" corner stand: https://www.printables.com/model/152529-gamecube-logo-dunk-corner-stand
Functionality-wise it's almost the same. However due to the reduced size, this stand will be LESS stable. Use at your own risk!!!
=================================
Both the bare and GBP-attached console get their respective stand. Note that they are not interchangeable.
Wired controllers are NOT recommended for obvious reasons. However if you HAVE TO, use a controller extension cable, strain-relief the plug of the extension somewhere, then connect your wired controller to the extension.
Slots for you to attach a velcro band is on the back, making cable management possible.
The stands are compatible with the IKEA LACK wall mount (255mm tall).
Support is recommended. If your support doesn't separate easily, it's your own fault. Check your slicer settings.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
10%
Filament: Generic PLA Any
Notes:
Use support.
Otherwise pretty simple.
Category: Video Games