1 / 1
American Lock - Lockout Tagout Name Plate Cover — image 1

American Lock - Lockout Tagout Name Plate Cover

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The company I work for puts paper name labels on our lockout tag out locks and they aways falls off.

Rating
5 / 5
Likes
1
Downloads
17
Makes
0
Views
122
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Lockout/Tagout Safety Lock Cover – 3D Printed (Fusion 360 Design)

This lockout/tagout (LOTO) safety lock cover is a purpose-designed, 3D-printed device created in Fusion 360 to support safe energy-control procedures during maintenance and servicing operations.

The cover is specifically designed for use with the A1106RED 1.5" Shackle K/D Red Aluminum Lockout Padlock, providing a secure and repeatable fit when properly installed.

Version 1 – Solid (Customize Body in Slicer)

  • Recommended materials: TPU or PLA

  • Design intent: Flexible or rigid single-piece cover

  • Printing requirements: No supports required

This version features a fully enclosed, solid geometry suitable for printing in TPU when flexibility and ease of installation are desired. When printed in PLA or other rigid materials, the cover maintains a precise, form-fitting profile around the padlock.

Due to tight design tolerances, rigid material prints may require light persuasion during installation to fully seat the padlock into the cover. Minor tapping or gentle hammering may be necessary to achieve proper engagement. This tight fit is intentional and helps prevent unintended movement once installed.

Version 2 – Cutouts with Customization Plate

  • Recommended materials: PLA or other rigid thermoplastics

  • Design intent: Rigid structure with identification/customization capability

  • Printing requirements: Supports required

This version incorporates through-holes and an integrated customization plate for labeling, identification, or asset marking. Due to the structural features and rigidity required for the plate, this model must be printed using PLA or another rigid material and requires supports during printing to ensure dimensional accuracy.

As with the solid version, this design utilizes tight tolerances for secure retention of the A1106RED lock. When printed in rigid materials, slight force or light tapping may be required to fully seat the padlock within the cover.

General Notes

  • Designed specifically around the A1106RED 1.5" shackle lockout padlock

  • Tight tolerances provide a secure, non-slip fit

  • Minor post-processing or light installation force may be required with rigid materials

  • Intended to support established lockout/tagout safety procedures


If you want, I can also:

  • Add print-orientation recommendations to reduce installation force

  • Include a TPU vs PLA comparison table

  • Write a clear end-user installation note (one-paragraph quick instructions)

  • Convert this into a sell-ready product listing or internal SOP attachment

Just tell me how you’re planning to use it.

add that text customazation or additional graphic can be added in the slicer software.

Here is the final polished version with your added slicer-customization note integrated cleanly and professionally. This reads well for product listings, internal documentation, or customer instructions.


Lockout/Tagout Safety Lock Cover – 3D Printed (Fusion 360 Design)

This lockout/tagout (LOTO) safety lock cover is a purpose-designed, 3D-printed device created in Fusion 360 to support safe energy-control procedures during maintenance and servicing operations.

The cover is specifically designed for use with the A1106RED 1.5" Shackle K/D Red Aluminum Lockout Padlock, providing a secure and repeatable fit when properly installed.

Version 1 – Solid (No Holes)

  • Recommended materials: TPU or PLA

  • Design intent: Flexible or rigid single-piece cover

  • Printing requirements: No supports required

This version features a fully enclosed, solid geometry suitable for printing in TPU when flexibility and ease of installation are desired. When printed in PLA or other rigid materials, the cover maintains a precise, form-fitting profile around the padlock.

Due to tight design tolerances, rigid material prints may require light persuasion during installation to fully seat the padlock into the cover. Minor tapping or gentle hammering may be necessary to achieve proper engagement. This tight fit is intentional and helps prevent unintended movement once installed.

Version 2 – Cutouts with Customization Plate

  • Recommended materials: PLA or other rigid thermoplastics

  • Design intent: Rigid structure with identification/customization capability

  • Printing requirements: Supports required

This version incorporates through-holes and an integrated customization plate for labeling, identification, or asset marking. Due to the structural features and rigidity required for the plate, this model must be printed using PLA or another rigid material and requires supports during printing to ensure dimensional accuracy.

As with the solid version, this design utilizes tight tolerances for secure retention of the A1106RED lock. When printed in rigid materials, slight force or light tapping may be required to fully seat the padlock within the cover.

Customization

Additional text customization or graphics may be added directly within the slicer software prior to printing. This allows users to apply department names, asset numbers, warning text, or logos without modifying the original Fusion 360 model.

General Notes

  • Designed specifically around the A1106RED 1.5" shackle lockout padlock

  • Tight tolerances provide a secure, non-slip fit

  • Minor post-processing or light installation force may be required with rigid materials

  • Text or graphics can be added at the slicer level for easy personalization

  • Intended to support established lockout/tagout safety procedures

Tags