1 / 3
Fyling Czech-Man (JosELF in his Sleigh One with Rudolph Spot Bot) — image 1
1 / 3

Fyling Czech-Man (JosELF in his Sleigh One with Rudolph Spot Bot)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Nerd-out your christmas tree

Rating
0 / 5
Likes
2
Downloads
5
Makes
0
Views
56
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

This is a mod for my other model the "Prusa Sleigh One" (https://www.printables.com/model/1519805-prusa-sleigh-one). The gimbal is supposed to let your JosELF fly around your christmas tree top at a moderate speed (let's see - I'm currently printing this and will show the results tomorrow). 

You'll need:

  • and a bunch of M3 bolts - length about 15mm

The gimbal is held in place by the "bearing" and "fixing clamp" parts, same for the motor with its dedicated "motor base". The battery holder can be put where it fits your tree.

so it'll look like this:

the motor has to be inserted in the "motor base" (I made a cut out because I f'd up (will upload the fix once someone complains)). then connect the wires of your battery holder.

If found that the geared motor I took has the almost perfect rpm so I don't need a poti or whatever to change the speed. And then the assembly will look more or less like the uploaded GIF.

The fixing clamps are designed for a trunk diameter of around 9mm. Because this was what my current tree is having. Yet this rather thin top is quite fragile so I had to print the "Sleigh One" at 40% scale - coming around 40g in total. But you see on the uploaded GIF (again mentioned, yes) that it works.