X-Rite Display Calibrator Protective Case

I created this custom form fitting case to protect the X-Rite or ColorMunki display calibration hardware. https://www.amazon.ca/X-Rite-EODIS3-i1Display-Pro/dp/B0055MBQOW/ref=as_li_ss_tl?crid=1D20U0J5RFO0Q&keywords=xrite+i1display+pro&qid=1585883463&sprefix=xrite,aps,177&sr=8-1&linkCode=sl1&tag=skartzamzn01-20&linkId=ce31abb455a1af0e7dc418e0cf92711c&language=en_CA https://www.amazon.ca/X-Rite-EODIS3-i1Display-Pro/dp/B0055MBQOW/ref=as_li_ss_tl?crid=1D20U0J5RFO0Q&keywords=xrite+i1display+pro&qid=1585883463&sprefix=xrite,aps,177&sr=8-1&linkCode=sl1&tag=skartzamzn01-20&linkId=ce31abb455a1af0e7dc418e0cf92711c&language=en_CA https://www.amazon.ca/X-Rite-EODIS3-i1Display-Pro/dp/B0055MBQOW/ref=as_li_ss_tl?crid=1D20U0J5RFO0Q&keywords=xrite+i1display+pro&qid=1585883463&sprefix=xrite,aps,177&sr=8-1&linkCode=sl1&tag=skartzamzn01-20&linkId=ce31abb455a1af0e7dc418e0cf92711c&language=en_CA https://www.amazon.ca/X-Rite-EODIS3-i1Display-Pro/dp/B0055MBQOW/ref=as_li_ss_tl?crid=1D20U0J5RFO0Q&keywords=xrite+i1display+pro&qid=1585883463&sprefix=xrite,aps,177&sr=8-1&linkCode=sl1&tag=skartzamzn01-20&linkId=ce31abb455a1af0e7dc418e0cf92711c&language=en_CA https://www.amazon.ca/X-Rite-EODIS3-i1Display-Pro/dp/B0055MBQOW/ref=as_li_ss_tl?crid=1D20U0J5RFO0Q&keywords=xrite+i1display+pro&qid=1585883463&sprefix=xrite,aps,177&sr=8-1&linkCode=sl1&tag=skartzamzn01-20&linkId=ce31abb455a1af0e7dc418e0cf92711c&language=en_CA https://www.amazon.ca/X-Rite-EODIS3-i1Display-Pro/dp/B0055MBQOW/ref=as_li_ss_tl?crid=1D20U0J5RFO0Q&keywords=xrite+i1display+pro&qid=1585883463&sprefix=xrite,aps,177&sr=8-1&linkCode=sl1&tag=skartzamzn01-20&linkId=ce31abb455a1af0e7dc418e0cf92711c&language=en_CA https://www.amazon.ca/X-Rite-EODIS3-i1Display-Pro/dp/B0055MBQOW/ref=as_li_ss_tl?crid=1D20U0J5RFO0Q&keywords=xrite+i1display+pro&qid=1585883463&sprefix=xrite,aps,177&sr=8-1&linkCode=sl1&tag=skartzamzn01-20&linkId=ce31abb455a1af0e7dc418e0cf92711c&language=en_CA

It will keep it dry and dust free as well. Just throw a desicant pouch into the cord compartment. I printed in three parts...

1. Lid
2. Base
3. Hinge (created using the parametric hinge customizer here: https://www.thingiverse.com/apps/customizer/run?thing_id=2187167)

Because the customizer makes the hinges quite large, I increased the hinge tolerances to be a bit looser fitting and then reduced the size of the hinge in Simplify 3D to 27mm X 62mm before slicing. It took a bit of persuading the break the hinge loose, but I carefully worked at it for a few minutes immediately after the print finished so the plastic was still a bit warm and less brittle. Eventually, it started to move and now it hinges nice and smooth. I attached the hinge using CA glue so that no screws were needed.

If you would like to use the hinge I made, it is in my Things here: https://www.thingiverse.com/thing:3504510 *Remember to reduce the size before slicing to roughly 27mm x 62mm (constrained).

I'm thinking about making a version with spaces to embed magnets to hold it closed. It was an afterthought and I may still drill some holes and glue some into the one I made.

If you found this useful, please consider a SMALL DONATION @ https://www.paypal.me/shanekartz to help cover the time of design.

Please Post your Makes. I would love to see how they turn out.

Thanks, Enjoy!

Print Settings

Printer Brand:

Creality

Printer:

CR-10

Rafts:

No

Supports:

No

Resolution:

.2mm

Infill:

15%

Filament: 3D Solutech PLA Black

Post-Printing

Optional Hinge

If you want the lid to be hinged then print one out and attach with CA glue. Look at my description above for details.

Supported Hardware

This is custom fitted to work with the X-Rite i1 Display Pro and the ColorMunki Display monitor/projector calibrators.rnhttps://xritephoto.com/i1display-prornhttps://xritephoto.com/colormunki-displayrnrnIt will not work with any other brand or model.

Category: Computer