1 / 2
Wall mounting Bracket for Homelab Micro Rack
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It's a bracket to be screwed to the wall to hold the "Homelab Micro Rack" included is a spacer for the bottom.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 42
- Makes
- 1
- Views
- 997
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Public Domain
This was a quick Wall bracket I made on Fusion360 for the Homelab Micro Rack. The Bracket is best printed with tree supports. You'll need 2 of the bottom spacers, they have 3 holes for mounting, but I only used one and it worked well. they use the same 3mm hardware as the rest of the Homelab Rack. Just install the spacers on the lower rear left and right of the rack, screw the wall bracket to the wall and you're set.