1 / 1
97mm honeycomb flash modifier
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple slide on modifier for studio lights
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 59
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
A simple honeycomb flash modifier for 97mm diameter studio lights, although you can re-scale to suit and it'll likely fit anything within reason!
I've found that my print slid nicely onto the light and didn't need an elastic band to help keep it on, but the tabs allow you to loop one over without it pinging across the room!
Simple to print, you shouldn't need any rafts, supports can be used for the overhang on the tabs. Print in PETG i would suggest if you're using a light that gets warm, PLA may warp.