Travel Mug or Beer Glass Handle (handy for cruise ships if you bring your own mug, or at breweries)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Background on why I did this: We have taken a few cruises and noticed that people often bring their own travel mugs,…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 0
- Views
- 305
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
Background on why I did this: We have taken a few cruises and noticed that people often bring their own travel mugs, because the to-go cups they have onboard are paper with a cardboard wrap, and ill-fitting lid. But to bring your own mugs, they take up room in your suitcase unless they can stack, and stacking mugs usually don't don't have handles (and those that do are big gulp cups, and we wanted something in the 16 oz size.) I had seen, and even designed and printed, some mug holders, but when you sit the mug down, the holder slips down the side of the mug, because there is nothing to hold the handle up. This is a few design iterations in, but this version of the handle has a ratchet mechanism that holds the handle to the top of the mug. It works equally well if the cup lid is not on, and works equally well on beer glasses. The top edge of the holder is 86mm, so this holder would work best for any cup or mug or glass that has an outer diameter of more than 86mm at the top.
It's a pretty simple design, although it took me a while to come up with it. The handle is printed with a void inside the connection between the part that holds the mug, and the part you hold on to. Into that void there is a space for a spring (a linear spring, which you can 3d print), a plunger (which you press with your thumb to release the "rack"), and a "Rack", which has a rachet and a head that grabs on to the top of the mug.
I printed the holder with fairly normal settings, but the smaller parts were all printed with fine settings (.16mm on my printer), since those are the parts that are most critical. The plunger is printed in an up/down orientation (as shown in the model), because I had too many problems trying to use supports. Within the piece of the plunger that grabs the rack, there are teeth that need supports - so rather than add supports with my slicer, I inserted some thin spacers to hold up the teeth as they are being printed (see the graphic image with parts in red - you simply break these spacers out of the slot so the rack can pass through the slot).
The one I printed has my name on it, but the version I uploaded doesn't have my name. I figured, if your name ain't "Steve", you probably wouldn't want that on your holder.
I've not taken this into the field (i.e., on a cruise) yet, but I did take the version that doesn't have the rack and plunger to hold the top of the mug. Other than it slipping down the mug, that version worked really well, and as an added bonus, it made it a LOT easier to carry my mug while also carrying a plate of food from the chow line.
Category: Kitchen & Dining