URAL 4320 32 Scale
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
1:32 Scale Model of heavy duty Military Truck. Fully 3D printable model with easy assembly.
- Rating
- 4.917 / 5
- Likes
- 857
- Downloads
- 2,208
- Makes
- 12
- Views
- 16,579
- Reviews
- 12
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Introduction:
This is a 3D printable scale model of URAL 4320, a heavy duty off-road capable truck designed by URAL for military and civilian operations. The model is designed in 1:32 scale for FDM 3D printing, which offers clean lines, curves, and easy assembly. The model is perfect for display, diorama builds, or collectors of vintage and military vehicles.
Parts to Print:
Print the parts as per the list. Use recommended colors for best results.
Part Name | Color | Quantity |
|---|---|---|
Air Filter | Black | 1 |
Axle | Black | 3 |
Cab | Color | 1 |
CargoBed_Floor | Color | 1 |
CargoBed_Side_FR | Color | 1 |
CargoBed_Side_LH | Color | 1+1(mirror) |
CargoBed_Tailgate | Color | 1 |
Chassis_FRONT | Black | 1 |
Chassis_MID | Black | 1 |
Chassis_REAR | Black | 1 |
Dashboard | Black | 1 |
Door Handle | Black | 2 |
Grill | Color | 1 |
Hazard Light | Red | 4 |
Headlight | White | 2 |
Hood | Color | 1 |
Indicators | Red | 2 |
Rear View Mirror | Black | 1+1(mirror) |
Rim | Color | 7 |
Roof | Color | 1 |
Seats | Black | 1 |
Spare Tire Holder | Black | 1 |
Steering Wheel | Black | 1 |
Taillight | Red | 2 |
Tire | Black(TPE) | 7 |
Print Process:
Position the parts in slicing software with orientations shown in the following images. Correct orientation is important for printing without additional support.
Mirror CargoBed_Side_LH is to be mirrored for CargoBed_Side_RH, so mirror it in slicer software before slicing. Same goes for Rear View Mirror.
If you have any issues regarding the files please comment. I will clarify asap.
Truck Bed (Color):
Chassis (Black):
Interior and Details (Black):
Cab (Color):
Print Settings:
The model is designed for printing with a 0.4 mm nozzle and requires no additional support. Use the printer-specific settings for the best quality prints.
Layer Height: 0.2 mm
Infill: 10–20% is sufficient
Supports: Not required. Orient the parts as shown in the images above.
Material: PLA recommended;
Bed Adhesion: Brim for Hood and Roof.
Post-Processing:
The prints may require finishing before starting assembly. The process involves removing the in-built supports, stringing if present, and smoothing the rugged edges. Also the slots have tight clearance and may require to enlarge for smooth fit. You may require the following tools as per preference and availability:
Cutter or Knife
Sandpaper
Small Files
Adhesive (Instant Glue)
Assembly Instructions:
Watch the following video instructions for assembling the model. Check for tolerances before assembly. Use the appropriate tool for sizing the joint members. The press-fitting of some parts may require force. Use pliers or a vice for fitting, if necessary. Use adhesive for a firm joint. Take necessary caution while assembling.