1 / 5
Tablet holder back seat Polestar 4
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Baseplate for a tablet holder to be mounted on the rear of the drivers seat of a Polestar 4
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 23
- Makes
- 0
- Views
- 279
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Baseplate to mount a tablet holder to the rear of the front seats in a Polestar 4.
Plate is designed for an M5 brass heat-set insert (7mm outer diameter, 6mm length) and an M5 threaded rod.
I also used a counter nut and some Loctite to secure the bolt in place.
In my case: used with a Logilink tablet holder that does not have a ball as a mount, but sits on an M5 thread.
Printed in PETG, 15% infill, 3 perimeter outlines, no supports, laying on the flat side / top.