Super EasyThreed K7
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Complete upgrade for the EasyThreed K7
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 98
- Makes
- 0
- Views
- 640
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
The intention of this mod was to convert the toy printer into a real printer, as capable as any ender, while maintaining the original aestetic of the printer.
Disclaimer:
This is not for new users, this is an advance mod that requires completely dissasembly of the printer, rewiring and install new firmware. the chasis of the printer also needs to be cut on certain places to accomodate the Y and E motors
original files can be foun on thinkercad
This mod is intended to be used along with my custom firmware
https://github.com/AldoRSan/super-EasyThreed-K7-Marlin-2.1.x
the hotend is a combination of a mk8 heatsink with a short throat and an e3dv5 heatblock, with a CHT clone nozzle.
I used screws and heat inserts that i already had around, most of them are for m3 and m2 screws
The printing volume now is 120x115x110
Update 2/2/2026
changed the shape of the fanducts a little to improve airflow
fixed the hotend carrier plate to correctly fit the fanducts