Straight trigger for V3 Gearbox Perun clicker
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Blade trigger which uses an 18mm stainless pin for V3 gearbox Perun clicker. Great for Mosquito Airsoft build
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 25
- Makes
- 0
- Views
- 349
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
Edit: Now added a skeleton version of the blade trigger. This is a tested version which holds up after many thousands of shots. It's used with a Perun clicker, so has to withstand a considerable pull force.
This is my attempt at making a straight trigger with the blade closer to the grip. All the others I could buy had the blade under the pivot point.
Printed out of PLA to avoid quality issues at 0.08mm layer height using only perimeters. Slow down speed to 50mm/s.
Use an M4 insert as a backing to push the pin into place using a vice.
There are two files to avoid overhangs and supports. Lay it flat like in the screenshot.
The files are step so that you could make your own triggers using this geometry.
Airsoft toy only.