1 / 1
Apple Desktop Bus ADB to USB converter casing with raspberry pi pico
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Casing for adb to usb converter (for connecting modern keyboards and mice to old Macintoshes).
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 90
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Inspired by: https://makerworld.com/cs/models/1184571-usb2adb-converter-diy#profileId-1195420
Refer to the following page for wiring diagram too. The female USB port is the same as in the original model, e.g. a bare PCB-mountable one.
However mine uses permanently attached ADB cable + internal strain relief. It can also be assembled without hot glue as both the USB connector and ADB cable can be press-fitted into the case and the whole case screwed together by 4 M2 screws+heat-set inserts.