Anker Prime Charger Holder Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is 45-degree angled holder for Anker Prime Charger 200W, 6 Ports, GaN.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 63
- Makes
- 1
- Views
- 306
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Open Community License v1
This is perfect for desktop use if you need easy access to all the cables. It fits the charger snugly. Feed the cable through the back first and insert into the charger before sliding the charger in. A wide base prevents it from tipping over. The stand can be pressed firmly against a back wall as the cable goes out to one side.
Material: PLA, PETG, or any other, really (uses about 105g)
Layer height: 0.20mm
Wall loops: 3
Supports: No (unless your printer is very bad at bridging)
Infill: 35% (lightning - for reduced material use)
Print on the "front" surface (see screenshot of a plate)