1 / 9
Exhaust check valve for K40 Laser — image 1
1 / 9

Exhaust check valve for K40 Laser

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Update as of February6, 2022: Added a protection ring to keep the axle in place and to prevent flap from touching the…

Rating
0 / 5
Likes
26
Downloads
81
Makes
0
Views
937
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial

Update as of February6, 2022:

Added a protection ring to keep the axle in place and to prevent flap from touching the exhaust tube. Flapdesign adjusted for clearance. See last picture.

This is a simple to print and assemble check valve preventing cold air getting into the room, where the K40 is located.

Use a piece of welding rod or filament as an axle. Fix the axle to the flap with superglue if needed. Cut the axle a bit shorther than flush to prevent binding on the exhausttube. New: Use the protection ring if applicable to keep axle in place and protect flap from exhausttube..

You might need to add a bit of maskingtape around the tube for an airtight fit to the K40.

Here it is in action: https://youtu.be/11aAburDRqo

This is only tested with the new type of K40 with an integrated exhaust 24V fan.

OpenSCAD file is included as usual for easy adjusting.

Have fun!

Cheers

Armin

Category: DIY

Tags