1 / 6
DJI Osmo Action 5 Pro Mount Screw M5 (54mm) — image 1
1 / 6

DJI Osmo Action 5 Pro Mount Screw M5 (54mm)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Custom M5 mount screw for DJI Osmo Action 5 Pro camera mounts. Designed for PETG printing and outdoor use

Rating
0 / 5
Likes
9
Downloads
46
Makes
0
Views
185
Reviews
0

Updated at source:

Model information

License
Standard Digital File License

Custom mount screw designed for DJI Osmo Action 5 Pro camera mounts.

Thread: M5

Total length: 54 mm

Thread length: 16 mm

Printed in PETG for improved durability, heat resistance, and outdoor use.

Suitable for action camera setups where reliable fixation is required.

Assembly instructions:

Insert the screw into the main printed plastic part and tighten it until the screw head reaches the seating area.

You should feel a slight snap when the head engages in its seat.

Do not fully tighten the screw at this stage.

Next, insert the second auxiliary printed plastic part.

The 3D model of this auxiliary part is provided separately.

From the threaded side of the screw, first install the printed plastic bushing.

After that, install an M5 nut.

Use a wrench to tighten the nut.

Tightening the nut pulls the screw head fully into the plastic part until it is securely seated.

Print settings:

Material: PETG

Layer height: 0.2 mm

Perimeters / walls: 5

Top layers: 4

Bottom layers: 4

Infill: 15%

Supports: no

Always check tightness before use.

Tags