TF2 Righteous Bison (X-Shot Menace reshell)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Righteous Bison nerf blaster shell based on the Snapper by Gemeneye. 4 round inline barrel.
- Rating
- 0 / 5
- Likes
- 39
- Downloads
- 51
- Makes
- 0
- Views
- 607
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice
To make this, you'll need an X-Shot Menace like the Snapper, plus one extra spring, 15mm long; one of those pen springs will do. Glues are needed if the parts' tolerance is loose, and lubrication of some sort.
Step 1. Assemble grip, insert two springs here, and lubricate all sliding parts
Step 2. Grip fully assembled with two of the screws from Menace
Step 3. Assemble the two main bodies, attach the right side with grip
Step 4. Assemble the internals like the Snapper, add in the Right side fin, pins and tug
Step 5. Assemble the left side body, screw in three locations:
Step 6. Attach these parts, Prim Rings will click in place
Step 7. Attach this thing
Step 8. This fin's top part needs glue
Step 9. Attach this knob with a screw
Step 10. Assemble the tip left and right sides, line up using a short piece of filament, and glue
