IKEA KALLAX - Glass Shelf (Insert) Repurposed
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
KALLAX Glas Insert, but as a display window.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 114
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
The IKEA KALLAX Glass insert (703.402.99) comes with a door and a glass plate to use as a shelf, but i never used those.
Instead i looked online for something that could hold the glass vertically to create a display case that i dont need to open regularly. I found nothing that satisfied me and cried myself to sleep, tragic.
Anyway, then i made this in PrusaSlicer and its the first model i've ever made, so dont expect a perfect design.
I printed it with PLA and 10% gyrioid infill
Its probably bigger than it needs to be
The glass is 4mm thick
The glass is approx. 33x32cm long/wide, so you can turn it if its too tight/loose
The example image shows a few ways to use them, i hope that explains it well enough
Its 15 cm long, so two should fit next to each other without a problem
No AI was used
No magnets or drilling
No supports needed